Connect with us

Gadgets

Apple’s next event is on September 15

Published

on

Enlarge / The image that goes with this month’s event.

Apple has announced the date for its next big product reveal event: September 15. As usual, the company is saying nothing at all about what to expect from it, but likely new product launches this fall include new 5G iPhones, new Apple Watch models, an Apple Silicon-equipped Mac of some kind—and possibly a refreshed iPad Air, new audio products, or the company’s long-rumored Tile competitor.

The event was revealed in an update to Apple’s events page, with a simple listing that reads “join us from Apple Park”—”from” suggests another streamed event rather than an in-person one. That’s not surprising, given that the COVID-19 pandemic is still ongoing.

The company also sent out email invitations to press with slightly more specific copy: “Please join us for a special Apple Event from Apple Park. Watch it online at apple.com.” Additionally, it carries the tagline “Time Flies.” The event time is 10am PDT on Tuesday, September 15—one week from today.

It’s unknown exactly what Apple plans to announce. Usually, the company unveils its new iPhone and Apple Watch models at an event this time of year, but that’s not quite certain; there have been conflicting reports about the launch window for the new iPhones, with some suggesting they will come later in the year this time, likely in October.

That said, one possible explanation for the “time flies” tagline is that it refers to a time-of-flight sensor, something like the augmented-reality 3D sensor included on the back of the latest iPad Pro that is expected to be added to some of the new iPhone models as well. It’s possible that Apple will announce the iPhones this month but start shipping them weeks later, as happened with the iPhone X back in 2017.

Apart from the likely imminent releases of iOS 14, iPadOS 14, and macOS Big Sur, the only Apple product that the company has already confirmed for this year is the Apple Silicon-equipped Mac, the first Mac to drop Intel CPUs in favor of a variant of the in-house chips already used in the tech giant’s iPhone and iPad product lines. Apple could reveal that Mac at this event, or it could come later in the year.

In any case, we will of course be liveblogging the proceedings here at Ars Technica, so tune in on September 15.

Continue Reading

Gadgets

New USB-C dock triples M1 Mac external monitor support, Anker says

Published

on

If you have an M1-based Mac, Apple says you’re limited to just one external monitor. But Anker, which makes power banks, chargers, docks, and other accessories, this week released a dock that it says will boost your M1 Mac’s max monitor count to three.

The 4250 Anker 563 USB-C docking station, spotted by MacRumors, connects to a USB-C port on your computer (which doesn’t have to be a Mac) and can also charge a laptop at up to 100 W. Of course, you’ll also need to plug in the dock’s 180 W power adapter. Once connected, the dock adds the following ports to your setup:

  • 2x HDMI (version not specified)
  • 1x USB-C (3.1 Gen 1): charges devices at up to 30 W
  • 1x USB-A (3.1 Gen 1): charges devices at up to 7.5 W
  • 2x USB-A (2.0)
  • 1x 3.5 mm headphone jack
  • 1x Ethernet
Port selection.
Enlarge / Port selection.

You’ll need the two HDMI ports and DisplayPort to add three monitors to an M1 MacBook. There are some notable limitations, though.

If you were hoping to use a trio of 4K displays, you’re out of luck. The dock can only support one 4K monitor at a time, and the output will be limited to a 30 Hz refresh rate. Most general-use monitors and TVs run at 60 Hz, and monitors can reach up to 360 Hz. 4K monitors will even hit 240 Hz this year. Running 4K at 30 Hz may be fine for watching movies, but for fast-paced action, things may not appear as smooth to keen eyes used to 60 Hz and beyond.

If you add a second external monitor via the Anker 563, a 4K screen will still run at 30 Hz via HDMI, while the DisplayPort will support up to 2560×1440 resolution at 60 Hz.

There are more disappointing caveats when looking at a tri-monitor setup. The 4K monitor will run at 30 Hz, but you can no longer use another monitor at 2560×1440. Instead, the additional two monitors are limited to 2048×1152 resolution and 60 Hz refresh rates. If the display doesn’t support 2048×1152, Anker says the monitor will default to 1920×1080.

You also have to download DisplayLink software, and you must be running macOS10.14 or Windows 7 or later.

Apple says that “using docks or daisy-chaining devices doesn’t increase the number of displays you can connect” to an M1 Mac, so don’t be surprised if there are hiccups during operation.

Anker isn’t alone in trying to do what Apple says can’t be done, as noted by The Verge. Hyper, for example, offers options for adding two 4K monitors to an M1 MacBook, one at 30 Hz and one at 60 Hz. That list includes a $200 hub with a similar port selection to the Anker 563 and a two-year limited warranty (the Anker dock gives 18 months). It works via DisplayPort Alt Mode, so you don’t need a DisplayLink driver, but it still requires the pesky Hyper app.

Plugable offers docking solutions that claim to work with M1 Macs for a similar price to the Anker dock, and they also limit 4K to 30 Hz.

Some docks have even more limitations when it comes to the M1, though. CalDigit notes that for its dock, “users cannot extend their desktop over two displays and will be limited to either dual ‘Mirrored’ displays or 1 external display depending on the dock.”

Alternatively, and for several hundred dollars more, you could buy a new MacBook and upgrade to an M1 Pro, M1 Max, or M1 Ultra processor. Depending on the device, those chips can support from two to five external displays, Apple says.

Continue Reading

Gadgets

Qualcomm’s Snapdragon “8+ Gen 1” salvage operation moves the chip to TSMC

Published

on

Qualcomm

Qualcomm’s mid-cycle “plus” chip refresh—the Snapdragon 8+ Gen 1—has been announced. As usual, Qualcomm is promising some modest improvements over the existing 8 Gen 1 chip. The company said the chip will provide “10 percent faster CPU performance,” thanks to a 200 MHz peak CPU boost (up to 3.2 GHz now) and a 10 percent faster GPU. The real shocker is a “30 percent improved power efficiency” claim for the CPU and GPU.

For the Snapdragon 8 Gen 1 Plus, Qualcomm is moving the chip from Samsung Foundry to TSMC, which is apparently where the power improvements are coming from. That’s a serious slam against Samsung’s 4 nm process versus TSMC’s 4 nm process, but it lines up with earlier reports of troubles at Samsung Foundry.

Swapping foundries as part of a mid-cycle upgrade is not normal, and it seems that Qualcomm has a bit of a salvage operation on its hands with the Snapdragon 8 Gen 1. The chip has not fared very well in the real world, with the CPU regularly turning in lower benchmark scores than 2021’s flagship Snapdragon 888.

Qualcomm doesn’t do all that much for phones year over year to begin with, and it is regularly years behind Apple’s SoC team. Usually, the one reliable upgrade Qualcomm can deliver is some measurable percentage of benchmark improvements. The GPU managed to improve for 2022, but to see the CPU horsepower decrease after Qualcomm claimed it would be 20 percent faster is a major disappointment. After a foundry change and a CPU MHz boost, Qualcomm’s 2022 CPU might finally be faster than its 2021 counterpart.

Continue Reading

Gadgets

The same phone for 25 years? iFixit on right to repair’s remaining obstacles, hope

Published

on

The fight for the right to repair remains an active battle as various companies and lawmakers claim worries around safety, cybersecurity, and design innovation. But with concerns about e-waste, device quality, and the health of independent repair shops mounting, advocates like iFixit CEO Kyle Wiens are keeping their gloves up. In the lead up to Ars Technica’s first annual Ars Frontiers event in Washington, DC, last week, we held a livestream with Wiens exploring this critical tech issue.

Making a federal case of it

Tech repairs got complicated in 1998 when Congress passed the Digital Millennium Copyright Act [PDF]. Section 1201 of the copyright law essentially made it illegal to distribute tools for, or to break encryption on, manufactured products. Created with DVD piracy in mind, it made fixing things like computers and tractors significantly harder, if not illegal, without manufacturer permission. It also represented “a total sea change from what historic property rights have been,” Wiens said.

This makes Washington, DC, the primary battleground for the fight for the right to repair.

“Because this law was passed at the federal level, the states can’t preempt. Congress at the federal level reset copyright policy. This fix has to happen at the US federal level,” Wiens told Ars Technica during the Road to Frontiers talk.

The good news is that every three years, the US Copyright Office holds hearings to discuss potential exemptions. Right to repair advocates are hoping Congress will schedule this year’s hearing soon.

Wiens also highlighted the passing of the Freedom to Repair Act [PDF] introduced earlier this year as critical for addressing Section 1201 and creating a permanent exemption for repairing tech products.

Apple’s promising, imperfect progress

Apple’s self-service repair program launched last month marked a huge step forward for the right to repair initiated by a company that has shown long-standing resistance.

Wiens applauded the program, which provides repair manuals for the iPhone 12, 13, and newest SE and will eventually extend to computers. He emphasized how hard it is for iFixit to reverse-engineer such products to determine important repair details, like whether a specific screw is 1 or 1.1 mm.

Apple’s program also offers repair tools, particularly benefiting independent repair shops, Wiens noted. But that doesn’t mean Apple can’t be more repair-friendly.

“What Apple is doing wrong in this case is they continue to embark on this strategy where they have paired specific parts to the phone,” Wiens explained.

“If you take two brand-new iPhone 13s and you swap the screens, you’re not necessarily going to get all the functionality that you would expect, which is strange because if you take two cars and you swap the engines, they work just fine. … You take two Samsungs, and you swap the screens, they work just fine.”

The exec worries that despite Apple claiming it wants to provide a detailed service history, this tactic can result in the banning of aftermarket parts.

“The repair economy, the circular economy around iPhones, is significant. … It creates a lot of jobs,” Wiens said. “Apple could easily short-circuit that economy by employing these cryptographic locks to tie parts to phones. Then this would tie into Section 1201 because it might potentially be illegal to circumvent those locks to make an aftermarket part work again.”

A repairable future

Wiens envisioned a world where gadgets not only last longer but where you may also build relationships with local businesses to keep your products functioning. He lamented the loss of businesses like local camera and TV repair shops extinguished by vendors no longer supplying parts and tools.

“I think it’s incumbent on all of us to say, what kind of economy do we want? Do we want a main street where we have local people that know how to fix and maintain our things? Or do we want a factory assembly line where we manufacture stuff in Asia, we dump it here, use it for however long it works, and then there’s no maintenance plan for it,” Wiens said.

He also discussed the idea of giving gadgets second and even third lives: An aged smartphone could become a baby monitor or a smart thermostat.

“I think we should be talking about lifespans of smartphones in terms of 20, 25 years,” Wiens said.

Continue Reading

Trending