If you’re OnePlus, what do you do to follow the fantastic OnePlus 8 Pro released earlier this year? If the latest rumors from Android Central are to be believed, the answer is apparently “not much.” The site has specs for the upcoming OnePlus 8T, and you’ve got to look very closely to see any difference between it and the OnePlus 8 Pro.
Android Central lists the OnePlus 8T with a 120Hz OLED panel, 8GB of RAM, and 128GB of storage. The site says the back will have four cameras, a 48MP main camera, 16MP wide-angle, 5MP macro, and a 2MP depth lens. These are supposed to be the OnePlus 8T specs, but they also all describe the existing OnePlus 8 Pro. The only real differences in the new model are the screen size—which, at 6.55 inches, is a bit smaller than the 6.78-inch 8 Pro—the slightly upgraded Snapdragon 865+ SoC, and a better 48MP sensor than the cheaper OnePlus 8 (which had a worse sensor than the OnePlus 8 Pro).
The front design looks pretty much identical to the OnePlus 8 Pro, too. OnePlus included a “oneplus_8t” image in the company’s latest release of the Android 11 beta, and it looks just like the 8 Pro, with thin bezels and a single hole-punch camera in the top-left. Smartphones all kind of look the same nowadays, but other options would have been a dual front-camera setup in the OnePlus Nord or a fancy new under-display camera.
Most companies release their phones on a rigid yearly schedule, so you can probably guess that the 8T will be released a year after the 7T. Android Central says, “OnePlus is planning to unveil the OnePlus 8T by the end of the month or in the first week of October.”
If you have an M1-based Mac, Apple says you’re limited to just one external monitor. But Anker, which makes power banks, chargers, docks, and other accessories, this week released a dock that it says will boost your M1 Mac’s max monitor count to three.
The 4250 Anker 563 USB-C docking station, spotted by MacRumors, connects to a USB-C port on your computer (which doesn’t have to be a Mac) and can also charge a laptop at up to 100 W. Of course, you’ll also need to plug in the dock’s 180 W power adapter. Once connected, the dock adds the following ports to your setup:
2x HDMI (version not specified)
1x USB-C (3.1 Gen 1): charges devices at up to 30 W
1x USB-A (3.1 Gen 1): charges devices at up to 7.5 W
2x USB-A (2.0)
1x 3.5 mm headphone jack
You’ll need the two HDMI ports and DisplayPort to add three monitors to an M1 MacBook. There are some notable limitations, though.
If you were hoping to use a trio of 4K displays, you’re out of luck. The dock can only support one 4K monitor at a time, and the output will be limited to a 30 Hz refresh rate. Most general-use monitors and TVs run at 60 Hz, and monitors can reach up to 360 Hz. 4K monitors will even hit 240 Hz this year. Running 4K at 30 Hz may be fine for watching movies, but for fast-paced action, things may not appear as smooth to keen eyes used to 60 Hz and beyond.
If you add a second external monitor via the Anker 563, a 4K screen will still run at 30 Hz via HDMI, while the DisplayPort will support up to 2560×1440 resolution at 60 Hz.
There are more disappointing caveats when looking at a tri-monitor setup. The 4K monitor will run at 30 Hz, but you can no longer use another monitor at 2560×1440. Instead, the additional two monitors are limited to 2048×1152 resolution and 60 Hz refresh rates. If the display doesn’t support 2048×1152, Anker says the monitor will default to 1920×1080.
You also have to download DisplayLink software, and you must be running macOS10.14 or Windows 7 or later.
Apple says that “using docks or daisy-chaining devices doesn’t increase the number of displays you can connect” to an M1 Mac, so don’t be surprised if there are hiccups during operation.
Anker isn’t alone in trying to do what Apple says can’t be done, as noted by The Verge. Hyper, for example, offers options for adding two 4K monitors to an M1 MacBook, one at 30 Hz and one at 60 Hz. That list includes a $200 hub with a similar port selection to the Anker 563 and a two-year limited warranty (the Anker dock gives 18 months). It works via DisplayPort Alt Mode, so you don’t need a DisplayLink driver, but it still requires the pesky Hyper app.
Plugable offers docking solutions that claim to work with M1 Macs for a similar price to the Anker dock, and they also limit 4K to 30 Hz.
Some docks have even more limitations when it comes to the M1, though. CalDigit notes that for its dock, “users cannot extend their desktop over two displays and will be limited to either dual ‘Mirrored’ displays or 1 external display depending on the dock.”
Alternatively, and for several hundred dollars more, you could buy a new MacBook and upgrade to an M1 Pro, M1 Max, or M1 Ultra processor. Depending on the device, those chips can support from two to five external displays, Apple says.
Qualcomm’s mid-cycle “plus” chip refresh—the Snapdragon 8+ Gen 1—has been announced. As usual, Qualcomm is promising some modest improvements over the existing 8 Gen 1 chip. The company said the chip will provide “10 percent faster CPU performance,” thanks to a 200 MHz peak CPU boost (up to 3.2 GHz now) and a 10 percent faster GPU. The real shocker is a “30 percent improved power efficiency” claim for the CPU and GPU.
For the Snapdragon 8 Gen 1 Plus, Qualcomm is moving the chip from Samsung Foundry to TSMC, which is apparently where the power improvements are coming from. That’s a serious slam against Samsung’s 4 nm process versus TSMC’s 4 nm process, but it lines up with earlier reports of troubles at Samsung Foundry.
Swapping foundries as part of a mid-cycle upgrade is not normal, and it seems that Qualcomm has a bit of a salvage operation on its hands with the Snapdragon 8 Gen 1. The chip has not fared very well in the real world, with the CPU regularly turning in lower benchmark scores than 2021’s flagship Snapdragon 888.
Qualcomm doesn’t do all that much for phones year over year to begin with, and it is regularly years behind Apple’s SoC team. Usually, the one reliable upgrade Qualcomm can deliver is some measurable percentage of benchmark improvements. The GPU managed to improve for 2022, but to see the CPU horsepower decrease after Qualcomm claimed it would be 20 percent faster is a major disappointment. After a foundry change and a CPU MHz boost, Qualcomm’s 2022 CPU might finally be faster than its 2021 counterpart.
The fight for the right to repair remains an active battle as various companies and lawmakers claim worries around safety, cybersecurity, and design innovation. But with concerns about e-waste, device quality, and the health of independent repair shops mounting, advocates like iFixit CEO Kyle Wiens are keeping their gloves up. In the lead up to Ars Technica’s first annual Ars Frontiers event in Washington, DC, last week, we held a livestream with Wiens exploring this critical tech issue.
Making a federal case of it
Tech repairs got complicated in 1998 when Congress passed the Digital Millennium Copyright Act [PDF]. Section 1201 of the copyright law essentially made it illegal to distribute tools for, or to break encryption on, manufactured products. Created with DVD piracy in mind, it made fixing things like computers and tractors significantly harder, if not illegal, without manufacturer permission. It also represented “a total sea change from what historic property rights have been,” Wiens said.
This makes Washington, DC, the primary battleground for the fight for the right to repair.
“Because this law was passed at the federal level, the states can’t preempt. Congress at the federal level reset copyright policy. This fix has to happen at the US federal level,” Wiens told Ars Technica during the Road to Frontiers talk.
The good news is that every three years, the US Copyright Office holds hearings to discuss potential exemptions. Right to repair advocates are hoping Congress will schedule this year’s hearing soon.
Wiens also highlighted the passing of the Freedom to Repair Act [PDF] introduced earlier this year as critical for addressing Section 1201 and creating a permanent exemption for repairing tech products.
Apple’s promising, imperfect progress
Apple’s self-service repair program launched last month marked a huge step forward for the right to repair initiated by a company that has shown long-standing resistance.
Wiens applauded the program, which provides repair manuals for the iPhone 12, 13, and newest SE and will eventually extend to computers. He emphasized how hard it is for iFixit to reverse-engineer such products to determine important repair details, like whether a specific screw is 1 or 1.1 mm.
Apple’s program also offers repair tools, particularly benefiting independent repair shops, Wiens noted. But that doesn’t mean Apple can’t be more repair-friendly.
“What Apple is doing wrong in this case is they continue to embark on this strategy where they have paired specific parts to the phone,” Wiens explained.
“If you take two brand-new iPhone 13s and you swap the screens, you’re not necessarily going to get all the functionality that you would expect, which is strange because if you take two cars and you swap the engines, they work just fine. … You take two Samsungs, and you swap the screens, they work just fine.”
The exec worries that despite Apple claiming it wants to provide a detailed service history, this tactic can result in the banning of aftermarket parts.
“The repair economy, the circular economy around iPhones, is significant. … It creates a lot of jobs,” Wiens said. “Apple could easily short-circuit that economy by employing these cryptographic locks to tie parts to phones. Then this would tie into Section 1201 because it might potentially be illegal to circumvent those locks to make an aftermarket part work again.”
A repairable future
Wiens envisioned a world where gadgets not only last longer but where you may also build relationships with local businesses to keep your products functioning. He lamented the loss of businesses like local camera and TV repair shops extinguished by vendors no longer supplying parts and tools.
“I think it’s incumbent on all of us to say, what kind of economy do we want? Do we want a main street where we have local people that know how to fix and maintain our things? Or do we want a factory assembly line where we manufacture stuff in Asia, we dump it here, use it for however long it works, and then there’s no maintenance plan for it,” Wiens said.
He also discussed the idea of giving gadgets second and even third lives: An aged smartphone could become a baby monitor or a smart thermostat.
“I think we should be talking about lifespans of smartphones in terms of 20, 25 years,” Wiens said.